Field Operations • Charlotte, NC

We clean exterior gutters, facades, and flat concrete across Charlotte without subcontractor handoffs.

Every wash rig dispatched from Eversfield Lane is run directly by Sergey. We work under written contracts with fixed-band quotes and deliver timestamped before-and-after roofline photos on every single property.

Field Lead: Sergey Operating Since: 2019 Base: 11807 Eversfield Ln, Charlotte, NC 28269

Direct exterior maintenance founded on Eversfield Lane

Crown Town Gutter Cleaning and Power Washing operates as an owner-operated residential exterior maintenance service based at 11807 Eversfield Ln, Charlotte, NC 28269. The business is conducted under the operating entity Crowntowncleaning, trading at crowntowncleaning.us as CROWN TOWN GUTTER CLEANING AND POWER WASHING. Postal base and operations dispatch: 11807 EVERSFIELD LN, CHARLOTTE, NC 28269, CHARLOTTE, NC, United States. The business is built on a straightforward operating principle: the person who inspects the roofline and writes your scope is the technician who sets up the ladder, hooks into your hose bib, and climbs to the gutter channel.

Large exterior franchises in Mecklenburg County routinely book orders through call centers, slice twenty percent off the top, and dispatch day-labor crews with consumer-grade electric washers. That model leads directly to crushed aluminum gutter troughs, stripped mortar joints, and high-pressure water forced behind vinyl siding vapor barriers. Sergey has run Crown Town continuously since 2019 without farming out field appointments. When you call (980) 689-1825, you speak directly with the tradesman executing the work.

Field lead Sergey checking water pressure gauge on exterior cleaning rig
Field Rig Calibration • Eversfield Lane Staging Sergey monitoring pump pressure regulators and chemical injection valves before running wash lines to residential eaves.

What we actually do on site and what each service costs

We focus exclusively on three core residential exterior treatments where technique directly dictates structural longevity: manual gutter clearing, low-pressure siding soft washing, and high-pressure rotary concrete cleaning. Every rate is published in advance within verified operational bands.

Published Field Rates & Work Durations Fixed Operating Ranges
$129 – $400
Gutter cleaning and full downspout flow flush (60–90 min).
$150 – $800
Facade house soft wash for vinyl, brick, and stucco (3–5 hrs).
$120 – $200
Driveway and walkway rotary surface pressure wash (2–3 hrs).

Your exact number inside those ranges depends strictly on measurable job criteria: overall home square footage, linear footage of gutter runs, roof pitch and height, roofline complexity, exterior substrate material, and organic soil accumulation. We do not invent arbitrary surcharges when the truck arrives.

Gutter clearing by hand with downspout water testing

We pull pine needles, oak tassels, and decayed silt out of the gutter troughs by hand into heavy-duty contractor buckets. We do not blow dry leaves across your driveway or blow wet sludge against your siding. Once the channels sit clean to the aluminum, we snake a hose down each vertical downspout run to confirm free outflow through foundation splash blocks and underground drain boots.

Low-pressure soft wash chemical injection

Blasting residential siding with four thousand pounds of pressure drives water past the weep holes and soaks your house wrap. Crown Town applies specialized detergents at low pressure under 300 PSI. The solution breaks down green algae and gloeocapsa magma mildew at the root. A high-volume, low-pressure garden rinse leaves paint, brick mortar, and vinyl seams completely intact.

Twenty-inch rotary surface deck cleaning

Handheld wands inevitably leave wavy tiger stripes across poured concrete driveways because spray height fluctuates with technician arm fatigue. We run commercial twenty-inch stainless steel surface cleaners. Dual spinning nozzles maintain a constant two-inch spray clearance over the slab, lifting embedded vehicle oil, tire marks, and black fungus into a uniform finish.

Commercial surface cleaning gear, pressure wash hoses, and ladder standoffs staged at field site
Commercial Maintenance Gear Arsenal Specialized rotary cleaners, low-pressure soft wash metering valves, and ladder standoffs staged for residential property protection.
"We do not leave until water exits your downspout boots clean, gutters sit level on their fascia hangers, and your driveway concrete dries uniform under the afternoon sun." Sergey • Crown Town Technician since 2019

Commercial equipment and property protection protocols

Exterior maintenance requires disciplined rigging. Aluminum gutters bend easily under the weight of an unassisted extension ladder. Sergey uses Werner ladders equipped with silicone standoff bumpers that bridge over the gutter channel and rest squarely against the siding, leaving the gutters untouched and undamaged.

Rig Component Commercial Specification Property Safeguard
Ladder Mounts Werner 32-ft with silicone standoffs Weight distributed on siding; zero gutter trough contact
Facade Soft Wash Sub-300 PSI dedicated chemical pump Prevents moisture intrusion behind siding vapor barriers
Driveway Deck 20-inch stainless rotary surface cleaner Uniform spray clearance; eliminates wand scarring and stripes
Gutter Debris Hand trowel extraction into sealed buckets Zero leaf or silt splatter across turf, mulch, and patios

Proof a property owner can weigh before paying

Homeowners frequently tell us they paid for gutter cleaning in the past only to find clogged downspout elbows during the next Carolina downpour. Because you cannot easily inspect second-story gutters without a ladder, we eliminate guesswork by providing complete before-and-after digital photography for every gutter run, facade elevation, and concrete slab.

Photos are captured on site, timestamped, and transmitted directly to your phone or email before we issue the invoice. If any downspout boot or gutter section does not match the agreed written standard, Sergey fixes it on the spot before the truck leaves your driveway.

Work we deliberately turn down

We do not offer quick dry-brush gutter blowouts without water testing downspouts. Blown dry debris litters flower beds and leaves downspout elbows jammed solid. We also decline steep slate roof walking where foot traffic cracks fragile historical tiles, and we do not apply four-thousand PSI directly against dry-rot fascia boards. If your exterior envelope requires carpentry repairs or new gutter fabrication before cleaning can proceed safely, we state that upfront in the initial assessment.

How to reach Sergey directly for dispatch and quotes

Crown Town operates Monday through Saturday, from 7:30 AM to 6:30 PM EST. You can call Sergey directly at (980) 689-1825 for immediate scheduling questions. Written service requests, scope inquiries, and property photos sent to [email protected] receive a response within twenty-four hours.

You may also submit property details through the inquiry form below to obtain an estimate based on your square footage, roof pitch, and driveway dimensions.

Request an Exterior Scope Estimate

Submit your property address and service requirements for direct review by Sergey.

Please provide your name.
Please enter a valid phone number.
Please enter a valid email address.
Please enter your property address.
Consent is required to submit.

Learn more about our specific services: explore Gutter Cleaning, read our Facade Soft Wash Guide, inspect Driveway Pressure Washing, or run the Scope & Fit Checker.